Rear Suspension Tech Sheet

Quality Parts and Service since 1976

Back to the Progressive Automotive Main Page

Call (740) 862-4696 for your needs!

125 West Rome St. Baltimore, Ohio 43105-1256

Tech Line: (740)-862-4696

Rear Suspension Tech Sheet

Set the vehicle up at the desired ride height. Since this is a custom built kit for your vehicle, we try to build it to your desired ride height. Just tell us where the center hub of the wheel needs to be in relation to the frame rail.

Include a template of the side of the frame rail, with the axle centerline marked perpendicular to the ground. This needs to be done with the vehicle at the desired ride height.

Measure the overall width of the fenders from the inside lip to inside lip. This can be done with a plumb bob to the ground, from one side to the other.

Overall Width of Frame (outside of rail to outside of rail):

Dimension A (20” ahead of axle centerline) _________________________________

Dimension B (axle centerline) _____________________________________________

Dimension C (11” behind axle centerline) ___________________________________

Overall Width of Frame Top Lip (outside of rail to inside of rail):

Dimension A (20” ahead of axle centerline) _________________________________

Dimension B (axle centerline) _____________________________________________

Dimension C (11” behind axle centerline) ___________________________________

Overall width of Fenders, Outside to Outside____________________________________

Thickness of fender lip____________________________________________________

Inner Wheel well width, Outside to Outside_____________________________________

Dimension D (Height from center of axle tube to bottom lip of frame)_________________

Which rear suspension:

Leaf Spring* Sweet Ryde C4 Corvette* Trianglated 4-bar

Paralell 4-bar 5-link

*For Leaf Spring suspension, width of frame 20” behind axle centerline_______________

*For C4 Corvette rear frame sections, please include the following:

Top lip and side rail template from 20” ahead of Rear axle centerline to the rear of frame,.

Width of rear frame rails, outside to outside___________________________________

Name: _______________________________________________________________

Address:______________________________________________________________

City: ______________________________State:_____________ Zip:______________

Daytime Phone Number: _________________________________________________

* All custom built kits require a 50% non-returnable deposit at the time the order is placed. We will notify the customer as to the total cost of the kit and shipping. No returns on custom built kits.